Roll Up Banners
33x79
Explore From $150
The complete display
Know the size, print and setup before you order.
Each order includes one printed fabric flag, its four-piece pole set and the base you choose. The black sleeve on the flag slides over the curved pole, then the flag is held taut at the bottom.
Three assembled heights
Small
9 ft
Printed graphic
23.5 × 78.5 in
Medium
10.5 ft
Printed graphic
24 × 104 in
Large
14 ft
Printed graphic
28 × 138 in
How the two print choices differ
One side · print-through
Vibrant on the front. The reverse shows a lighter, mirrored version of the same design; the black pole sleeve sits on the left when viewed from the front.
Two sides · separate graphics
Front and back are printed separately and sewn around a silver blockout layer. Use this when the message must read correctly in both directions.
Choose a base for the surface
Ground stake
For lawn, soil and other soft outdoor ground. Its bearing lets the flag turn with the wind.
Cross base
For flat, hard surfaces indoors or outdoors, such as a lobby, event floor or sidewalk.
Four steps to set it up
1. Lay out the pole set
Identify the four interlocking sections and the curved top.
2. Connect the poles
Join the sections by hand until the pole is fully assembled.
3. Slide on the flag
Feed the curved pole through the black sleeve along the flag edge.
4. Secure and tension
Attach the flag at the bottom of the pole and pull the elastic cord snug.
If the flag looks wrinkled or loose, tighten the bottom elastic cord so the fabric displays smoothly.
Product details
Tall moving signage that makes a business entrance easier to find.
- Small, Medium, and Large commercial display sizes
- One-sided print-through or separate two-sided graphics
- Ground stake for soft ground or cross base for hard surfaces
- 4 oz dye-sublimated polyester mesh
- Size-specific CMYK artboards at 150 DPI; 2-inch safe contour
- No bleed or crop marks
Three practical visibility levels
Small assembles to 9 feet, Medium to 10.5 feet, and Large to 14 feet. Each size uses its own exact flag template so artwork stays aligned to the angled shape and pole sleeve.
Choose how both sides read
One-sided printing allows the design to show through in a muted mirrored view from the back. Two-sided printing uses separate graphics and a blockout layer when each direction needs a clean readable message.
Match the base to the location
Use the ground stake in lawns, landscaped areas, and other soft ground. Use the cross base on sidewalks, show floors, lobbies, patios, and other hard surfaces.
Exact large-format setup
Use the ordered size's exact supplier artboard in CMYK at 150 DPI. Keep important content 2 inches inside the flag contour; do not add crop marks or extra bleed. Two-sided orders need separate front and back artwork.
